Carpet and Flooring Installation – How to Install Carpet Tiles on Concrete – C&L Flooring

 

There are many do it yourself installation methods over the world wide web. In just one click, you can search many installation methods. However, having your house flooring done, should be taken seriously.

And by taking it seriously, house flooring should be done with an expert knowledge. That is provided by C & L Flooring installation service experts. Carpet and flooring installation can be exhausting. That is why, services should be asked from the best flooring company – C & L Flooring.

 

There are four important steps in carpet installation: Floor Priming, Site Layout, Pallets and Box Sequencing, and Adhesive Application.

 

How to Install Carpet Tiles on Concrete?

 

Floor Priming

 

A floor that is extremely porous should be primed. A floor that has excess dust all over should also be primed. Concrete is a kind of rough and heavy building material. It is a combination of sand, water, cement and gravel.

 

Concrete is where priming is the most important part of the installation processes. Plywood floors should also, be completely primed. Its substrates must be at least ¾” thickness. The use of thin plywood should not be done.

 

Site layout

 

The installation of carpet tile should begin at the center of the room. This should be properly positioned to maximize the module size of the largest perimeter cut. Site layout is very important. This is because it will determine how a carpet tile will be patterned.

 

Site layout is also important for carpet tile design. Snapping a line of a chalk parallel to the starting point will help as guide to ensure perimeter modules.

 

Pallets and box sequencing

 

Carpet installation should be installed according to its manufacturer’s design. Not all are able to produce high quality carpet products. But C & L Flooring surely offers unlimited collection of high quality carpet tile products.

 

With C & L installation flooring services, expert installers make sure that they follow the manufacturer’s instructions. Manufacturer’s instruction for installation of their manufactured carpet tile products. And this is done by the selection of pallets in a sequential manner.

 

Adhesive application

How to install carpet tile with adhesive? There are several ways to do it. But in the process of adhesive application, installer must use Mohawk carpet tile glue. It has a strong adhesive property. That makes adhesion very strong.

 

Adhesives must be applied in a FULL SPREAD manner. This kind of method is best adapted by C & L Flooring company. This is because, in this manner, carpet tile installation will be done better.

How to install commercial carpet tiles, you may ask? And who are the best carpet tile installers? How about a question of, “is it possible to install carpet tiles without a glue?” Do not fret! Because all these questions can be addressed by C & L Flooring.

 

It is the best flooring company in Dayton Ohio that will surely help. With C & L Flooring, you can be assured of best quality services. For queries…

CALL US NOW at 1-937-258-1406!